|
|
Specifications
- MCU: STM32F103ZET6, a 32-bit ARM Cortex M3 microprocessor.
- Clock Speed: 72 MHz
- 512 KB Flash, 64 KB SRAM (on-chip), 1 MB SRAM (external)
- 106 GPIOs
- 17 PWM pins, at 16 bit resolution
- 21 ADC pins, at 12-bit resolution
- 3 SPI peripherals
- 2 I2C peripherals
- 12 Channels of direct memory access (DMA), with 2 DMA controllers
- 3 USARTs (serial port), 2 UARTs
- 2 advanced, 4 general-purpose, and 2 basic timers
- Dedicated USB port for programming and communications
- Dimensions: 4″ × 2.1″
 Arduino ProtoShield from "Household" Items (<5$)
- Convenient form-factor: 40-pin DIP, 0.1-inch pitch
- Drag-and-drop programming, with the board represented as a USB drive
- Best-in-class Cortex-M3 hardware:
- 100 MHz ARM with 64 KB of SRAM, 512 KB of Flash
- Ethernet, USB OTG
- SPI, I2C, UART, CAN
- GPIO, PWM, ADC, DAC
- Easy-to-use online tools:
- Web-based C/C++ programming environment
- Uses the ARM RealView compile engine
- API-driven development using libraries with intuitive interfaces
- Comprehensive help and online community
- ARM mbed NXP LPC1768 Development Board
- MBED_v2.1.lbr
- Features
- STM32F100RB microcontroller, 128 KB Flash, 8 KB RAM in 64-pin LQFP
- On-board ST-Link with selection mode switch to use the kit as a stand-alone ST-Link (with SWD connector)
- Designed to be powered by USB or an external supply of 5 V or 3.3 V
- Can supply target application with 5 V and 3 V
- Two user LEDs (green and blue)
- One user push button
- Extension header for all QFP64 I/Os for quick connection to prototyping board or easy probing
- STM32: Урок 1 — Настраиваем IDE
- STM32: Урок 2 — Quickstart
- STM32: Урок 3 — Документация
- STM32: Урок 4 — GPIO
Модуль TE-SL6087-NV08C может быть использован для знакомства с технологиями GSM/GPRS/EDGE/GLONASS/GPS, отработки приемов управления GSM-модулем с помощью AT-команд и для разработки законченных навигационно-связных систем слежения за подвижными объектами. Отладочный модуль TE-SL6087-NV08C позволяет определить текущие координаты, вектор скорости и текущее время по сигналам глобальных навигационных систем GLONASS, GPS, GALILEO, COMPASS, SBAS и передать эти данные через GSM-сеть с помощью технологий GSM(CSD), GPRS/EDGE, SMS.
Arduino Ethernet - This board contains an ATmega328microcontroller
and the same ethernet IC used on Ethernet Shield.
You need a FTDI cable or a USBSerialadapter to program the ATmega328.
SD log shield with RTC and a square pads prototyping area for Arduino
SD Card support
- Allows backup of a large amount of data on SD card and PC retrieval
- Support SdFat library for SD FAT16/FAT32 SC/HC cards
- 3V3 regulator on the shield
Real Time Clock
- Adding date and time data based on the component I2C DS1307
- Support the standard library DS1307
- Date accessed using the format year / month / day of week / hour / minute / seconds
- Time adjustable 12h with info AM / PM or 24H
- Backup Time on lithium battery (lasting 10 years if 48mAh)
- Corrections leap years, months with less than 31 days
- SQW output signal (square wave) Programmable 1Hz (for pulse every second, or 4kHz or 8kHz or 32kHz)
- Clock not subject to bug date before 100 years
Страница 6 из 8« Первая«...45678»
|
Свежие комментарии