The Keil MCB1700 Evaluation Boards enable you to create and test working programs based on the NXP LPC1700 family of ARM Cortex™-M3 processor-based devices.
The MCB1700 Evaluation Board is available in two different configurations:
- The MCB1750 Evalution Board is populated with an NXP LPC1758 device
- The MCB1760 Evaluation Board is populated with a NXP LPC1768 device
Features
- 100MHz ARM Cortex-M3 processor-based MCU
- On-Chip Memory: 512KB Flash and 64KB RAM
- Color QVGA TFT LCD
- 10/100 Ethernet Port
- USB 2.0 Full Speed — USB, USB-OTG, and USB Host
- 2 CAN interfaces
- 2 Serial Ports
- SD/MMC Card Interface
- 5-position Joystick and push-button
- Analog Voltage Control for ACD Input
- Amplifier and Speaker
- Up to 70 GPIO
- Debug Interface Connectors
- 20-pin JTAG (0.1 inch connector)
- 10-pin Cortex debug (0.05 inch connector)
- 20-pin Cortex debug + ETM Trace (0.05 inch connector)
The ARM Cortex™-M0 processor is the smallest, lowest power and most energy-efficient ARM processor available. The exceptionally small silicon area, low power and minimal code footprint of the processor enables developers to achieve 32-bit performance at an 8-bit price point, bypassing the step to 16-bit devices. The ultra low gate count of the Cortex-M0 processor also enables it to be deployed in analog and mixed signal devices.
Свежие комментарии